|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
138-010 / 65A~300A |
Special Feature
- Fast Acting Solenoid Control
- Double Chamber Structure for Safe Control
- Easy Installation and Maintenance
- Smooth Operation without Water Hammering
Model 138-010 consists of Basic Valve(BALEM130) and Solenoid on-off Pilot Valve. It opens and closes upon receiving an electrical signal to the solenoid pilot control.
This valve, as a solenoid pilot valve, can be provided two different types. The standard one is basic valve which normally closed(basic valve opens as solenoid operates), and another one is order to made which normally opened(Basic valve closes as solenoid operates).
Optional control features are available, such as timer, relay, probe, etc for remote control by electrical signal depends on users' site conditions.
Specifications
Specifications
| Screwed
KSPT(BSP) - NPT Standard
| Flanged
10kgf/㎠ - ANSI 150 Standard |
Globe
| 50A(2") ~ 80A(3")
| 50A(2") ~ 300A(12") |
Angle
| 50A(2") ~ 80A(3")
| 50A(2") ~ 300A(12") |
Operating Pressure
Specifications
| KS D 1513. Class 10
| ANSI B 16.42 Class 150 |
Operating Pressure
| 0.05 ~ 1.5 MPa(0.5~15kg f/㎠)
| 7 ~ 213 PSIG |
Media
| Temperature : 0°C ~ 80°C Water, Oil (Order-Made) |
Materials
Compartment
| Material Options |
Body & Cover
| Ductile Iron
| SSC13 |
Diaphragm Washer & Disc
| Cast Iron
| SSC13 |
Cover Plug & Bearing
| Brass
| STS304 |
Shaft & Seat
| STS304 |
Diaphragm
| Nylon reinforced N.R |
Disc Seal
| N.R |
Note
NSF/ANSI Standard 61 Epoxy Coating standard
Nylon 11 Coating available (Rilsan Coating) : optional |
Solenoid Control Valve Specifications
Voltage
| 24, 110, 220 AC 60Hz or 50Hz / 12, 24 DC |
Operating Pressure
| 1.5 MPa (213 PSIG) |
Coil Insulation
| Coil Insulation Class B(Standard) H(Optional) |
Power Supply |
AC 8 Watts / DC 12 Watts |
Description
Item
| Description |
1
| BALEM 130 (Basic Valve) |
2
| Strainer |
3 |
Cock Valve |
4 |
2-Way Solenoid control Valve |
5 |
Needle Valve |
6 |
Cock Valve |
7
| BALEM 411 |
Control Diagram
|
Typical Applications
Dimensions
Valve Size (mm)
| 50
| 80
| 100
| 150
| 200
| 250
| 300
| When Ordering,
Please Specify
1. Model No.
2. Valve Size
3. Pattern : Globe or Angle
4. Working Pressure
5. Screwed or Flanged
6. Desired Materials
7. Desired Options |
A Screwed
| 238
| 318
| -
| -
| -
| -
| - |
AA 10kgf/㎠
| 238
| 305
| 381
| 508
| 645
| 756
| 864 |
B
| 78
| 93
| 105
| 140
| 165
| 200
| 223 |
Cmax
| 200
| 240
| 275
| 375
| 462
| 536
| 623 |
Dmax
| 157
| 179
| 206
| 284
| 351
| 398
| 461 |
ΦE
| 140
| 165
| 208
| 326
| 408
| 497
| 562 |
F Screwed
| 119
| 140
| -
| -
| -
| -
| - |
FF 10kgf/㎠
| 119
| 152
| 191
| 254
| 322
| 378
| 432 |
G Screwed
| 83
| 114
| -
| -
| -
| -
| - |
GG 10kgf/㎠
| 83
| 102
| 127
| 152
| 203
| 219
| 349 |
Weight kgs
| 14
| 26
| 41
| 95
| 169
| 268
| 492 |
|
|
Valve Size (inches)
| 2
| 3
| 4
| 6
| 8
| 10
| 12 |
A Screwed
| 9.38
| 12.50
| -
| -
| -
| -
| - |
AA 150 ANSI
| 9.38
| 12.00
| 15.00
| 20.00
| 25.38
| 29.75
| 34.00 |
B
| 3.00
| 3.75
| 4.50
| 5.50
| 6.75
| 8.00
| 9.70 |
Cmax
| 7.88
| 9.45
| 10.83
| 14.77
| 14.25
| 21.10
| 24.53 |
Dmax
| 6.19
| 7.05
| 8.12
| 11.19
| 13.82
| 15.67
| 18.15 |
ΦE
| 5.52
| 6.50
| 8.19
| 12.83
| 16.07
| 19.57
| 22.13 |
F Screwed
| 4.69
| 6.25
| -
| -
| -
| -
| - |
FF 150 ANSI
| 4.69
| 6.00
| 7.50
| 10.00
| 12.69
| 14.88
| 17.00 |
G Screwed
| 3.25
| 4.50
| -
| -
| -
| -
| - |
GG 150 ANSI
| 3.25
| 4.00
| 5.00
| 6.00
| 8.00
| 8.62
| 13.75 |
Weight lbs
| 31
| 57
| 90
| 210
| 373
| 591
| 1085 |
Installation
- Before installation, flush to clean pipeline.
- Provide adequate clearance for servicing.
- Arrow on valve body must match actual flow direction in pipe.
- Preferred valve installation, - upright, for horizontal position; others acceptable.
- Install isolation valves on both sides of control valve.
- For assistance, please contact our office or factory for specific recommendations.
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page